EMT Practice Test

1. Question Content...

---

Question1: A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.
The customer has the following goals for their long-term backup retention:
retain data for over two years at low cost
data is archival and rarely accessed, if ever
Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)

Question2: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question3: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question4: A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

Question5: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question6: Match each customer data center architecture to its network topology.

Question7: ou are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question8: You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.
Which action must be performed to finish the installation?

Question9: Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

Question10: A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?

Question11: A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for additional equipment that may be added in the future.
How should the solution integrator respond'?

Question12: What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

Question13: A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
Each Server will have 6 x 10G SFP+ Ports.
Each Server will have a dedicated iLO port.
The customer requires that only two switches be used.
The customer requires separate control planes.
Which switch configuration can meet these requirements?

Question14: What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?

Question15: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question16: Match the HPE Tool with its use case. Select all that apply.

One Config Advanced (OCA) - Estimate the power and cooling requirements and weight for a rack of equipment Single Point of Connectivity Knowledge (SPOCK) - Check compatibility of storage components Products and solutions Now (PSNow) - Download a technical presentation for a DL380 Gen10

Question17: Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

Question18: You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.
What should you do?

Question19: Match the HPE Tool with its use case. Select all that apply.

Question20: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question21: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question22: You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

Question23: You are installing a rack at customer site.
How can you ensure redundant power to the rack?

Question24: You are installing an HPE ProLiant server in a rack at a customer site. The customer's facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.
Which ProLiant feature addresses the customer's concern?

Question25: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question26: A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price.
They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements?

Question27: Which component of HPE iLO provides continuous monitoring of more than 1600 parameters?

Question28: Match the Networking Product Family to the appropriate use case:

Question29: Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

Question30: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question31: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question32: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question33: You are configuring an internal Smart Array controller on an HPE ProLiant server.
Which statement is true regarding the drives in the logical array?

Question34: Which network protocol is used to build a loop-free logical topology for Ethernet networks?

Question35: A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

Question36: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right.
(Choose two.)

Question37: Match each HPE solution to its corresponding technology usage.

Question38: What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?

Question39: A customer needs to locate an exact time when a link down event occurred at the FC port of Nimble storage Which on-premises tool can the customer use?

Question40: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question41: You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q
16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit Two SN3000B FC Switches Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

Question42: Match each characteristic to the appropriate RAID level.

Question43: Match each adapter to its characteristic.

Question44: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question45: Which protocol can be used to access a shared directory on a network-attached storage device?

Question46: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question47: Drag the correct protocols from the left to their appropriate area on the topology.

Question48: A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer's needs?

Question49: HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.
Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

Question50: For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

Question51: Which protocol verifies that the ports in common between two switches have compatible settings and removes the likelihood of a misconfigured aggregated link?

Question52: A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep thei number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

Question53: Which information is contained in the Array Diagnostic Report? (Choose two.)

Question54: Refer to the exhibit.

You are designing a new Nimble AF40 for your customer. The array will be added into an existing Nimble HF60 environment connected with SN6000B switches. You have created the configuration shown in the exhibit and noticed an error What should you change in your configuration to ensure it meets the customer requirements?

Question55: Refer to the exhibit.

You are designing a new Nimble AF40 for your customer. The array will be added into an existing Nimble HF60 environment connected with SN6000B switches. You have created the configuration shown in the exhibit and noticed an error What should you change in your configuration to ensure it meets the customer requirements?

Question56: Match each characteristic to the correct storage type.

Question57: Which hardware and software components make up a Nimble dHCI infrastructure?

Question58: What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?

Question59: Indicate whether each management feature manages or monitors a single system or multiple systems.

Question60: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question61: A customer has a branch office that needs a local file server. The branch office does not have a server rack.
For backup performance, the server must have two processors.
Which HPE server should the company install?

Question62: Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.

Question63: HPE support asks you to provide the Active Health System log from HPE StoreEasy 1660 Storage to expedite a troubleshooting process.
Which procedures will generate the AHS log for HPE Support? (Choose two.)

Question64: What is a primary benefit of DAS?

Question65: Which protocol can be used to access a shared directory on a network-attached storage device?

Question66: What can you do when installing an HPE switch to provide protection from electrostatic discharge?

Question67: Match each characteristic to the appropriate RAID level.

Question68: A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?

Question69: Match each characteristic to the correct storage type.

Question70: A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system needs the customer's requirements?

Question71: Match each characteristic to the correct storage type.

Question72: You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer's needs?

Question73: Match each customer data center architecture to its network topology.

Question74: A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.
Which storage solution meets this requirement?

Question75: You are troubleshooting an HPE Proliant ML350 Gen server. You determine that the active ROM is corrupt and the system has not automatically switched to the redundant ROM. You need to manually switch the ROM.
What should you do?

Question76: Which hardware and software components make up a Nimble dHCI infrastructure?

Question77: Match the industry trend with its use case.

Question78: You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

Question79: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Question80: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question81: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question82: Match each customer data center architecture to its network topology.

Question83: Match each HPE solution to its corresponding technology usage.

Question84: Match the feature to the lowest iLO5 license in which it is available

Question85: Match the speed and protocol with the appropriate component.

Question86: Refer to the exhibit.

A customer has two HPE ProLiant DL380 Gen10 servers running as an Oracle cluster. They are trying to reduce licensing costs and want to move to the best processor available from the list to minimize licensing costs while still providing a high level of performance for the Oracle database.
Which DL380 Gen10 processor would you recommend?

Question87: Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put. Delete, and Patch?

Question88: A customer has the following requirements:
* two or more 10Gb SFP+ uplinks
* downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables.
* 24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

Question89: Refer to the exhibit.

A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?

Question90: Match each ProLiant solution to its ideal use case

Question91: Which hardware and software components make up a Nimble dHCI infrastructure?

Question92: Match each characteristic to the correct storage type.

Question93: What is an access port on an Ethernet switch?

Question94: A customer plans to back up a file server that holds 2 TB of dat
a. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)

Question95: A customer is purchasing a complete HPE solution that includes servers, storage, and networking. They need to leverage cloud storage for an off-site copy of their data in case of disaster.
Which HPE solutions should you suggest? (Choose two.)

Question96: You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)

Question97: Match each ProLiant solution to its ideal use case

Question98: A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?

Question99: A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

Question100: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question101: Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

Question102: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question103: A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
* Support for Multi Chassis Link Aggregation in an active-active mode.
* The control plane must not be a single point of failure.
* Rapid Fail-over.
* Unified Management.
* They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?

Question104: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question105: A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.
Which component should be selected when designing the 10 Gbps connectivity option for the server?

Question106: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question107: You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

Question108: A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

Question109: Match each ProLiant solution to its ideal use case

Question110: A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer?

Question111: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question112: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question113: Match the customer requirement to the appropriate HPE storage solution.

Question114: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
10TB of high performance shared storage
Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question115: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question116: A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment.
Which HPE solutions should they install to fulfill these requirements (Select two.)

Question117: A customer needs NFS access on a fiber channel array.
What must be included in the solution to meet this requirement?

Question118: An HPE customer wants to perform a simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question119: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question120: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question121: A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup.
They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?

Question122: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend for performing this task?

Question123: Refer to the exhibit.

The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?

Question124: A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.
The customer has the following goals for their long-term backup retention:
retain data for over two years at low cost
data is archival and rarely accessed, if ever
Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)

Question125: You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

Question126: Match the characteristic to the correct HPE ProLiant family.

Question127: A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?

Question128: A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.
Which HPE solution meets this customer's requirements?

Question129: Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put. Delete, and Patch?

Question130: A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

Question131: A customer has the following requirements:
* two or more 10Gb SFP+ uplinks
* downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables
* 24 downlink ports
Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

Question132: Match each adapter to its characteristic.

Question133: You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

Question134: For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

Question135: A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
* Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
* Each Server will have 6 x 10G SFP+ Ports.
* Each Server will have a dedicated iLO port.
* The customer requires that only two switches be used.
* The customer requires separate control planes.
Which switch configuration can meet these requirements?

Question136: A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.
Which action should the customer take first?

Question137: You have completed a non-disruptive activation of firmware on an SN6000 switch.
Which session must be restarted manually?

Question138: Refer to the exhibit.

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN
20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?

Question139: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?

Question140: Match the speed and protocol with the appropriate component.

Question141: Match each adapter to its characteristic.

Question142: Refer to the exhibit.

When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?

Question143: In which protocol are REST API requests transported?

Question144: An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

Question145: You are creating a configuration for a new Nimble HF40 array.
Which tool should you use to ensure that you include adequate cache in the configuration?

Question146: A customer needs a solution that supports rapid provisioning changes on physical bare-metal servers and on a virtualization hypervisor. They are considering migrating to a new solution that supports software-defined storage.
Which HPE compute platform should the customer implement?

Question147: Place the components on the left in the correct order on the right for the recommended power-up sequence.

Question148: A customer requires a recovery strategy that provides multiple rollback points during the day for their Microsoft SQL database. The customer needs to be able to recover data instantly.
Which method meets this requirement?

Question149: A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.
Which HPE product should you recommend to the customer?

Question150: A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

Question151: Match the customer requirement to the appropriate HPE storage solution.

Question152: A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

Question153: A customer needs an HPE Nimble storage solution with 100TB capacity. They want to be able to add more disk capacity if needed Which HPE tool can help you validate the proposed storage solution and that it is supported by HPE?

Question154: Refer to the exhibit.

You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?
A)

B)

C)

D)

Question155: You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?

Question156: Match the Networking Product Family to the appropriate use case:

Question157: A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
* Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
* Each Server will have 6 x 10G SFP+ Ports.
* Each Server will have a dedicated iLO port.
* The customer requires that only two switches be used.
* The customer requires separate control planes.
Which switch configuration can meet these requirements?

Question158: A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array.
You plan to propose the following configuration:
2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit
1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives
4 VMware vSphere Standard licenses
1 VMware vCenter Server Foundation licenses
5 year 24x7x4 support for all equipment
What must be added to the configuration to provide a complete solution? (Choose two.)

Question159: Match each HPE solution to its corresponding technology usage.

Question160: What should you configure to limit the scope of broadcast domains in an Ethernet network?

Question161: A customer just purchased a ProLiant DL385Gemo Plus and warns 10 team more about HPE intelligent Provisioning features.
Which task can the customer complete using HPE Intelligent Provisioning?

Question162: A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.
What should the customer use to manage the devices?

Question163: You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.

Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

Question164: A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?

Question165: A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?

Question166: A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

Question167: A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)

Question168: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question169: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
* 3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
* 10TB of high performance shared storage
* Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question170: A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment Which solution meets the customer needs?

Question171: A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer's needs?

Question172: Match each workload profile description with the corresponding profile. (Select all that apply.)

Question173: Match the Networking Product Family to the appropriate use case:

Question174: A server administrator needs to see the 24-hour history of the power consumed by an installed HPE ProLiant server.
Which HPE tool can the admin use to gather this information?

Question175: Refer to the exhibit.

A customer has two HPE ProLiant DL380 Gen10 servers running as an Oracle cluster. They are trying to reduce licensing costs and want to move to the best processor available from the list to minimize licensing costs while still providing a high level of performance for the Oracle database.
Which DL380 Gen10 processor would you recommend?

Question176: What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

Question177: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with: quad processors, 256 GB RAM, and 10Gb dual-port NICs
10 TB of high performance shared storage
cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question178: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question179: You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

Question180: Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

Question181: A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
* Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
* Each Server will have 6 x 10G SFP+ Ports.
* Each Server will have a dedicated iLO port.
* The customer requires that only two switches be used.
* The customer requires separate control planes.
Which switch configuration can meet these requirements?

Question182: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question183: A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?

Question184: A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?

Question185: A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question186: Match the feature to the lowest iLO5 license in which it is available

Question187: Refer to the exhibit.

The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?

Question188: A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity
Flash-accelerated storage
Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?

Question189: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question190: Match the industry trend with its use case.

Efficiently user server, storage, and networking resources - Virtualization Externalize the infrastructure and eliminate data center capital expenditures - Cloud computing Share a common resource or execute a common application across multiple servers for high availability and/or load balancing - Clustering Deploy workloads at cloud-like speed on an HPE factory-integrated infrastructure - Converged system

Question191: You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

Question192: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question193: A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?

Question194: You are installing a server solution in a customer's data center.
How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

Question195: What has HPE implemented in the HPE ProLiant Gen10 to prevent malware?

Question196: Which protocol can be used to access a shared directory on a network-attached storage device?

Question197: A customer wants to decrease problem resolution time on their HPE infrastructure.
Why would this customer benefit from Insight Remote Support?

Question198: In which layer of the OSI model would you find an IP address?

Question199: You are upgrading firmware on two SN6000 switches in a fabric with a CLI connection. You did not wait for the upgrade to be activated on the first switch before beginning to install the firmware on the second switch.
What must you do to install the firmware on the second switch?

Question200: Refer to the exhibit.

A customer has two HPE ProLiant DL380 Gen10 servers running as an Oracle cluster. They are trying to reduce licensing costs and want to move to the best processor available from the list to minimize licensing costs while still providing a high level of performance for the Oracle database.
Which DL380 Gen10 processor would you recommend?

Question201: Refer to the exhibit.

A customer has been using VEEAM and the HPE StoreOnce 3620 shown in the exhibit to backup their environment. The customer's legal team has asked to double their retention times for all backup sets, and they are starting to run out of space on the StoreOnce.
Which options could you recommend that the customer add to their existing configuration to accommodate the new requirement? (Select two. Each option represents a separate solution.)

Question202: A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
HPE Nimble AF20 with 17 TB usable capacity.
Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?

Question203: Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?

Question204: When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

Question205: A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

Question206: A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?

Question207: A customer is planning to purchase new MPE rack-mount servers for their data center. The customer has an exist™ storage environment and wants to minimize required rack space and local storage.
Which HPE server should they install?

Question208: Refer to the exhibit.

You are designing a new Nimble AF40 for your customer. The array will be added into an existing Nimble HF60 environment connected with SN6000B switches. You have created the configuration shown in the exhibit and noticed an error What should you change in your configuration to ensure it meets the customer requirements?

Question209: Indicate whether each management feature manages or monitors a single system or multiple systems.

Question210: A customer is experiencing read cache hit ratios well below 80 percent on an HPE Nimble HF40 array Data is constantly being ejected from the Nimble array's First In First Out cache What should you recommend?

Question211: Refer to the exhibit.

When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?

Question212: You are installing a combined server and storage solution at a customer location. What must you keep in mind regarding the typical requirements for the location? (Choose two.)

Question213: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with dual AMD processors, 256GB RAM, and 10Gb network connectivity
10TB of high performance shared storage
Cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question214: Match each HPE solution to its corresponding technology usage.

Question215: A customer has an ESXi server in a branch office They need to perform backups locally. The local backups must be replicated to the main data center with built-in deduplication What should the customer install at the branch office?

Question216: A customer's backup administrator is responsible for maintaining and coordinating all nightly backups of the company's 30 servers.
Which HPE product can be used as the primary interface to orchestrate all backup targets and Catalyst copy functions?

Question217: Match each characteristic to the appropriate RAID level.

Question218: A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer's needs?

Question219: Match the feature to the lowest iLO5 license in which it is available

Question220: Match each HPE solution to its optimal use case.

Question221: A customer needs a shared storage solution for a virtualization platform that will host a database application.
The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question222: A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode.
The control plane must not be a single point of failure.
Rapid Fail-over.
Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer's requirements?

Question223: Which information is contained in the Array Diagnostic Report? (Choose two.)

Question224: A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend for performing this task?

Question225: A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

Question226: A customer needs to support both network and storage traffic on their network, which includes Ethernet, iSCSi, and Fibre Channel devices. The customer is concerned about the large amount of cables coming from the various cards inserted in their rack servers, as well as the operational costs in their data center.
Which component addresses these issues?

Question227: A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

Question228: Match the storage technology to the storage type.

Question229: You need to update the firmware on an MSL2024.
Which HPE utility do you need to use?

Question230: A customer has implemented an HPE ProLiant server with internal storage and needs to monitor the array health status.
Which management application can the customer use to discover errors quickly and minimize the possible downtime?

Question231: Match the HPE Tool with its use case. Select all that apply.

Question232: Match the Networking Product Family to the appropriate use case:

Question233: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question234: Match each adapter to its characteristic.

Question235: Match each characteristic to the correct storage type.

Question236: A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

Question237: What is the correct cable type to use when connecting a pair of switches using Long Range (LR) Transceivers?

Question238: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question239: Refer to the exhibit.

An administrator connected a hypervisor to interface Ten-GigabitEthernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. VLAN 10 is configured to be tagged, and VLAN 20 is configured to be untagged on the hypervisor.
The administrator found that all the virtual machines in VLAN 20 can communicate with each other, but not with any virtual machines on VLAN 20 external to the hypervisor.
Given the output in the exhibit, what should you do to resolve the issue?

Question240: Match the storage technology to the storage type.

Question241: A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer's needs?

Question242: A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.
Which Gen10 feature best addresses the customer's concern?

Question243: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question244: Refer to the exhibit.

The information shown is displayed for a Nimble array you are installing. The customer's administrator has asked you for the speed at which the Nimble ports are connecting to their SAN switches, and you have run the command shown to determine the number of gigabits per second used by this port connection.
What speed does the exhibit indicate is in use?

Question245: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question246: Which disk technology provides the lowest latency for performing random reads?

Question247: A customer's environment includes virtual machines and containers. They need an on-premises platform that allows them to easily and efficiently deploy cloud-native applications at rack-scale.
Which HPE solution meets the customer requirements?

Question248: Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.

Question249: A customer needs a single, dual-processor server for an Enterprise Resource Planning solution for a single office. The customer application uses a mix of HDDs and SSDs and up to 3TB of RAM.
Which HPE Solution should you propose?

Question250: Match the characteristic to the correct HPE ProLiant family.

Question251: Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.
What should be added to the configuration to ensure availability?

Question252: Which storage array feature allows replication between the data center and AWS and Microsoft Azure?

Question253: A customer is expanding from local storage to a SAN environment for the firt time. They plan to future proof their environment with a 16 Gb Fibre Channel. They also want to allow for future I/O expansion with new servers.
Identify the correct server and storage to meet the customer requirements.

Question254: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question255: Match the HPE Tool with its use case. Select all that apply.

Question256: A client complains about systems reliability issues caused by their staff's inability to identify the root cause of failures. The client's lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?

Question257: Which HPE feature enables the customer to achieve this A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
server performance improvement?

Question258: What is an access port on an Ethernet switch?

Question259: Which backup targets are available from an HPE StoreOnce backup system? (Choose two.)

Question260: You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)

Question261: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Question262: A customer needs a new environment to support an ERP system. The sizing information you received shows the following requirements:
3 servers with: quad processors, 256 GB RAM, and 10Gb dual-port NICs
10 TB of high performance shared storage
cloud-based performance monitoring and analytics
The customer prefers rack mounted equipment.
Identify the components that will meet the customer requirements, then drag the correct components on the left to their appropriate location in the environment on the right.

Question263: You are installing multiple components into an existing server.
Which HPE resource can you use to verify the compatibility of the server hardware options with the server?
(Select two.)

Question264: A customer is configuring their SAN.
Which types of data typically require block storage? (Choose two.)